Figure 6063 Customize Size CQC Aluminum Extrusted Cabinet,Kitchen Profile
Product Description ♦
Packing : Protect film for each profile, shrink film / kraft paper exterior for each bundle or pack as customer request.
FOB port: Foshan, Shenzhen, Guangzhou
Delivery time: 15-20 days after receiving the deposite.
Payment term: 30% deposite and 70% balance after the delivery
Material: 6063 Alloy
Temper: T5
Brand name: Kaiyamei Aluminum
Finish: Mill Finished, Anodizing, Electrophoresis, Powder Coating ,Polish, Wood grain, Sand Blasting
Color: Clear Satin, Bronze, Black, Golden, Silver,
Thickness: 0.8mm - 1.5mm
MOQ: 500KG. Usually 12 tons for a 20 feet container; 24 tons for a 40 feet container.
Length: 5.8-5.98m, or as customer's request
Size: Customer's request or choose our factoty drawing
Sample delivery: Two weeks (one week for mould +one week making sample)
Sample design: It is better we can get your drawing or sample, we mainly make according to your design, and we can keep confidential for your design.
Maximum extruder machine: 8000 tons; Minimum extruder machine: 500 ton
Our profiles advantages ♦
(1) Lots of choices
(2) Cost effective
(3) Low tooling costs
(4) Design flexibility
(5) Versatility in joining
(6) Quick response
(7) Rapid prototyping
(8) Short delivery
(9) Wide range of finishes
(10) High quality
(11) Very little scratch.
(12) Accurate mold as well as accurate size.
(13) Standard alloy composition
(14) Both ends of the profiles are very plain and with no burr.
General Chemical Composition of Alloy ♦
| Alloy |
6063(%) |
6061(%) |
6082(%) |
| Silicon Si |
0.20~0.60 |
0.40~0.80 |
0.7~1.2 |
| Iron Fe |
0.35 |
0.70 |
0.5 |
| Copper Cu |
0.10 |
0.15~0.40 |
0.1 |
| Manganese Mn |
0.10 |
0.15 |
0.4~0.8 |
| Manganese Mg |
0.45~0.90 |
0.18~1.2 |
0.6~0.8 |
| Chromium Cr |
0.10 |
0.04~0.35 |
0.25 |
| Zine Zn |
0.10 |
0.25 |
0.2 |
| Titanium Ti |
0.10 |
0.15 |
0.1 |
| Others(each) |
0.05 |
0.05 |
0.05 |
| Others |
0.15 |
0.15 |
0.15 |
| Aluminum |
Remainder |
Remainder |
Remainder |
Mechanical Properties of Sections under Room Temperature ♦
|
Alloy
|
State
|
Tensile strength test |
Hardness test |
| Tensile strength Rm M pa |
Non-proportional Stretching Stress |
Stretching rate |
Pattern thickness |
HV |
HW |
| Rp0.2Mpa |
(A50mm%) |
mm |
HV |
HW |
| |
| 6063 |
T4 |
130 |
75 |
14 |
- |
| T5 |
160 |
110 |
8 |
0.8 |
58 |
8 |
| T6 |
205 |
180 |
8 |
- |
|
6061
|
T4 |
184 |
110 |
16 |
- |
| T6 |
265 |
245 |
8 |
- |
|
6082
(6351)
|
T4 |
205 |
110 |
12 |
- |
| T6 |
290 |
250 |
6 |
- |
FAQ ♦
Q1: What is aluminum extrusion, fabrication, and anodization?
A: Aluminum Extrusion refers to a process of creating shapes with an aluminum billet or log by forcing it to flow through a shaped opening in a die. Aluminum can be extruded into standard shapes or specific designs depending on a customer’s preference.
Aluminum Fabrication refers to building aluminum components by cutting, drilling, slotting, tapping,bending, CNC machining, mechanical assembly and welding.
Aluminum Anodization is an electro-chemical process of coating aluminum with a thin layer of oxide to increase corrosion resistance and harden the surface.
Aluminum also can be dyed with various anodizing colours,which in most widely used is Brone shades.
Q2: What’s the thickness for anodizing? Can you do 15um?
A: Our normal thickness is about 10 um. Yes, we can do 15um and above.
Q3: What color you can do for powder coating? The thickness for powder coat?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80um.
Q4: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
Q5: What’s the delivery time for samples and mass production?
A: (1). 2-3 weeks to open the new moulds and make samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
About us :
Foshan Kaiya Aluminum Co., Ltd is a comprehensive and professional enterprise integrating research, design production and sales of aluminium extrusion profiles for construction and industrial applications. There are currently 24 aluminum extrusion process lines at 500MT TO 2500MT, 5 process lines for anodizing, 3 process lines for powder coating, 2 process line for painting, 2process line of polishing and brushing. We still have 2 packing line. Our annual production capacity has reached 80,000 tons which is at the forefront of the aluminium industry in China.
