1. Brand name: Kaiyamei Aluminum
2. Material: 6063
3. Temper: T5
4. Thickness: General profile 0.8mm - 5.0 mm
5. Color: Bronze, silver, Gold, Black, Champagne or as your request
6. Finish: Anodize, Powder coating, Wooden grain, elecrophoresis, PVDF coating and so on,
7. Shape: Square , flat , round , hollow , oval , triangle , U - profiles , L - profiles , T - profiles, H - profiles , customized avaliable
8. Deep Processing: Cutting , punching , drilling , tapping , milling , bending , welding etc.
9. Packing: Protect film for each profile, shrink film / kraft paper exterior for each bundle or pack as customer request.
10. Markets: Australia , Germany , North America , Africa and European countries and area
Advantages :
(1) Complex integral shapes
(2) Cost effective
(3) Low tooling costs
(4) Design flexibility
(5) Versatility in joining
(6) Machinable
(7) Rapid prototyping
(8) Short lead times
(9) Wide range of finishes
| Alloy |
6063(%) |
6061(%) |
6082(%) |
| Silicon Si |
0.20~0.60 |
0.40~0.80 |
0.7~1.2 |
| Iron Fe |
0.35 |
0.70 |
0.5 |
| Copper Cu |
0.10 |
0.15~0.40 |
0.1 |
| Manganese Mn |
0.10 |
0.15 |
0.4~0.8 |
| Manganese Mg |
0.45~0.90 |
0.18~1.2 |
0.6~0.8 |
| Chromium Cr |
0.10 |
0.04~0.35 |
0.25 |
| Zine Zn |
0.10 |
0.25 |
0.2 |
| Titanium Ti |
0.10 |
0.15 |
0.1 |
| Others(each) |
0.05 |
0.05 |
0.05 |
| Others |
0.15 |
0.15 |
0.15 |
| Aluminum |
Remainder |
Remainder |
Remainder |
Powder coating profile
|
Powder coating surface treatment: minimum partial thickness of coating on decorative surface≥40μm;Maximum partial thickness≤120μm.
|
Questions and Answer
Q1: What is aluminum extrusion, fabrication, and anodize?
A: Aluminum Extrusion refers to a process of creating shapes with an aluminum billet or log by forcing it to flow through a shaped opening in a die. Aluminum can be extruded into standard shapes or specific designs depending on a customer’s preference.
Aluminum Fabrication refers to building aluminum components by cutting, drilling, slotting, tapping,bending, CNC machining, mechanical assembly and welding.
Aluminum Anodization is an electro-chemical process of coating aluminum with a thin layer of oxide to increase corrosion resistance and harden the surface.
Aluminum also can be dyed with various anodizing colours,which in most widely used is Brone shades.
Q2: What’s the thickness for anodizing?
A: Our normal thickness is about 10 µm.
Q3: What color you can do for powder coating? The thickness for powder coat?
A: We can do any color for powder coat as long as you can provide the color sample. Our normally powder coating thickness is 60-80µm.
Q4: What color you can do for wood grain?
A: Our most popular colors are Western Red Cedar, Australia Cedar, Jarrah I, Jarrah II, Chestnut, Bush Cherry, Bush Wood, Western Wood, Snow Gum, etc. If you need any other colors, we can do according to the color samples you provide.
Q5: What’s the delivery time for samples and mass production?
A: 1. 2-3 weeks to open the new moulds and make samples.
2. 3-4 weeks after receipt of deposit and confirmation of the order.
